Simulation Mechanical Forums (Read-Only)
Welcome to Autodesk’s Simulation Mechanical Forums. Share your knowledge, ask questions, and explore popular Simulation Mechanical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Reply
Message 1 of 9
fdimpfel
479 Views, 8 Replies

Re: won't finish

report attached

8 REPLIES 8
Message 2 of 9
Royce_adsk
in reply to: fdimpfel

This is related to the Multiphysics package and not Simulation CFD.  Moving the post.

 

Thanks,

Royce



Royce.Abel
Technical Support Manager

Message 3 of 9
fdimpfel
in reply to: fdimpfel

For a 24 x 24 x24 box with a blower at inlet - still issue with finishing. No error codes. Just increased mesh at inlet and blower outlet. will send pic of  model next....

Message 4 of 9
fdimpfel
in reply to: fdimpfel

Goofy--- one model gives good solution and next model with all asame conditions wont finish. And I made sure all was same.

Message 5 of 9
fdimpfel
in reply to: fdimpfel

Spoiler

Solution went back to "wont finish"

 

 

Message 6 of 9
John_Holtz
in reply to: fdimpfel

A quick question for you fdimpfel: If you run the same model twice in a row, does it stop at the same point?

 

You will probably need to provide an archive of your model in order for someone to figure out what is happening. Please see the post "Create, Post, or Provide an Archive of your model".



John Holtz, P.E.

Global Product Support
Autodesk, Inc.


If not provided already, be sure to indicate the version of Inventor Nastran you are using!

"The knowledge you seek is at knowledge.autodesk.com" - Confucius 😉
Message 7 of 9
fdimpfel
in reply to: fdimpfel

Is there a way to turn the outter model back on? I used the internal function to get the negative space and now want to view the results with the original model to make a presentation.

Fred

Message 8 of 9
John_Holtz
in reply to: fdimpfel

Hello,

 

Just to clarify, the "outer model" refers to the solid parts which are not part of the fluid flow simulation. Right?

 

The Results environment can only display the parts that are included in the actual simulation: in this case, the fluid parts. So the obvious solution is to "photo shop" an image of the fluid results and the solid parts. Depending on how you want things to look, you may  be able to add a background image to the Results environment ("Results Options > View Settings > Background Image"), and show the results and solid at the same time. However, the background bitmap is a static image, and the model (fluid parts in this case) will be "on top" of the background regardless of the view orientation, etc.

 



John Holtz, P.E.

Global Product Support
Autodesk, Inc.


If not provided already, be sure to indicate the version of Inventor Nastran you are using!

"The knowledge you seek is at knowledge.autodesk.com" - Confucius 😉
Message 9 of 9
fdimpfel
in reply to: fdimpfel

correct...... ok seems like a cutaway view might be able to show a good picture due to back view front view issue

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report