Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I'm doing a linear heat transfer analysis...I started the model in PV/Designer....But when I'm changing the edit element definition...It does not accept...Can PV/Designer model be used for heat transfer analysis?...If not, are there work around to make it work?...
It should not matter where the model comes from. So please give a complete description of the problem, maybe even a step-by-step description starting from the Element Definition, when the problem occurs, and what the problem is.
The answer to these questions may be helpful, too:
What version of Simulation Mechanical are you using?
What analysis type are you using?
What element type are you using?
Can you make changes to "Setup > Model Setup > Parameters"?
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")