Simulation Mechanical Forums (Read-Only)
Welcome to Autodesk’s Simulation Mechanical Forums. Share your knowledge, ask questions, and explore popular Simulation Mechanical topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Impact Simulation on a Aluminum wheel.

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
tcarrillo12
970 Views, 3 Replies

Impact Simulation on a Aluminum wheel.

I would like to simulate an impact test that's performed on aluminum wheels for an automobile as part of the evaluation for performance.

The wheel is tilted 13deg from a horizontal plane and mass of, let's say 1250 lb is dropped from a height of 9 inch. Please image attached.
3 REPLIES 3
Message 2 of 4
zhuangs
in reply to: tcarrillo12

You can use MES contact to simulate this impact problem.

 

-Shoubing

Message 3 of 4
Sualp.Ozel
in reply to: zhuangs

Take a look at the following web page link to see typical results you can get using Autodesk Simulation Mechanical when performing such analysis with "MES"

 

Impact Simulation on a Wheel

 

-Sualp

Message 4 of 4
eaterac
in reply to: Sualp.Ozel

It would be just AMAZING if you can upload a tutorial on how to do that... (I mean the simulation showed in the link you provided  http://www.applycon.com/Examples/06_Wheel_Deformation6.htm    )

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report