Discussion Groups

Simulation Mechanical and Multiphysics

Reply
Valued Contributor
ramses061
Posts: 61
Registered: ‎05-04-2011

Re: Failed analysis

07-23-2012 02:18 PM in reply to: zhuangs

But in fact the human head is not symetric. However did your computer finish the analysis?

Please use plain text.
Employee
zhuangs
Posts: 262
Registered: ‎10-04-2010

Re: Failed analysis

07-24-2012 02:07 PM in reply to: ramses061

What I got is as follows:

 

** Warning: element   3091 in part   7: determinant =-.86603495E-06<= DETTOL!
  2.77848564E-03   3.5424   4.0000E-11  8   0   5.0000E-03
  2.77848564E-03   3.5424   4.0000E-11  8   1   5.0000E-03c
  2.77848568E-03   3.5424   4.0000E-11  8   0   5.0000E-03
  2.77848568E-03   3.5424   4.0000E-11  8   1   5.0000E-03c
  2.77848572E-03   3.5424   4.0000E-11  8   0   5.0000E-03
  2.77848572E-03   3.5424   4.0000E-11  8   1   5.0000E-03c
  2.77848576E-03   3.5424   4.0000E-11  8   0   5.0000E-03
  2.77848576E-03   3.5424   4.0000E-11  8   1   5.0000E-03c

 ** Warning: element   3091 in part   7: determinant =-.10045208E-07<= DETTOL!
 
 ** Stop: too many time steps in autotm.
 
    It is possible caused by:
    Step reduction factor is too big

Please use plain text.
Valued Contributor
ramses061
Posts: 61
Registered: ‎05-04-2011

Re: Failed analysis

07-24-2012 04:40 PM in reply to: ramses061

Why didn't you say it yesterday :smileyvery-happy:

Yesterday i reduced it and the analysis goes very fast. But it still doesn't finish. The analysis worked about 26 hours and suddenly the electric gone :smileysad: My ups worked 15 minutes and then the computer went to sleep mode but the anaysis aborted.

Please use plain text.