Discussion Groups

Simulation Mechanical and Multiphysics

Reply
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Algor Simulation Accuracy Benchmarks

824 Views, 8 Replies
11-09-2010 12:13 PM

Hi all,

 

Since my arrival at Algor 7 years ago, my team & I have been striving to improve the accuracy of the Algor Simulation software.  These efforts have increased since the acquisition of Algor by Autodesk and have steadily been ramping up.  I am going to post our progress in this thread.

 

Those of you familiar with Algor Sim know that Algor has a set of verification models called the Algor Verification Examples (AVE).  There are 110 of these models and these models are run every release.  These model have know results from well-known FEA references.  Of course, Algor Sim passes this quality check every release.

 

A less biased test is to use models from a third party such as NAFEMS.  We have run seven linear structural/modal and 21 nonlinear structural models based on NAFEMS models.  In each of these cases, Algor Sim results match within reasonable tolerance to the published NAFEMS results.  This benchmark activity was done with both Algor Sim 2011 and 2012 (in-development).

 

Cheers,

Sam Murgie

Software Development Manager

Autodesk, Inc.

Please use plain text.
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Re: Algor Simulation Accuracy Benchmarks

11-09-2010 12:19 PM in reply to: SaMurgie

Oops...that would be 210 AVE models...

Please use plain text.
Active Contributor
amosman
Posts: 37
Registered: ‎09-12-2008

Re: Algor Simulation Accuracy Benchmarks

11-11-2010 05:08 AM in reply to: SaMurgie

Hi Sam,

 

How can we get NAFEMS' models?

 

Thanks

Please use plain text.
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Re: Algor Simulation Accuracy Benchmarks

11-11-2010 07:43 AM in reply to: amosman

Are you looking for the NAFEMS reference or the Algor archive or both?

Please use plain text.
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Re: Algor Simulation Accuracy Benchmarks

11-11-2010 07:46 AM in reply to: SaMurgie

We have also been running various verification models as supplied by our competitors. 

 

We ran the 6 LS-DYNA models supplied with earlier versions of ANSYS.  Algor MES successfully ran all 6 models and the results matched within tolerance to LS-DYNA.

Please use plain text.
Active Contributor
amosman
Posts: 37
Registered: ‎09-12-2008

Re: Algor Simulation Accuracy Benchmarks

11-11-2010 11:48 AM in reply to: SaMurgie

Looking for NAFEMS references.

I aleardy have ALGOR archive.

Thanks

Please use plain text.
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Re: Algor Simulation Accuracy Benchmarks

11-11-2010 12:44 PM in reply to: amosman

We are using the descriptions as described by a competitor :smileywink:

Please use plain text.
New Member
2Sun
Posts: 1
Registered: ‎05-07-2010

Re: Algor Simulation Accuracy Benchmarks

03-24-2011 01:59 PM in reply to: SaMurgie

Sam

You mentioned comparison of Algor against NAFEMSbenchmarks, (National Association Finite Element Modeling Systems NAFEMS dot org)

 

1) Where can we see those results for perspective on what to expect on Algor simulation uncertainty ("accuracy")?

 

2) I am especially interested in performance of nonlinear vs linear modeling.

Please use plain text.
Employee
SaMurgie
Posts: 67
Registered: ‎11-09-2010

Re: Algor Simulation Accuracy Benchmarks

03-25-2011 11:58 AM in reply to: SaMurgie

Hi,

 

We are still debating on the best way to publish these results.  Hence I don't have a document to send to you at at the moment.  However, I recommend reviewing the results for the Algor Verification Manual (AVE) models.  This set of models and manuals were part of earlier versions of Algor's installation.  The manual is (or at least was) in the Subscription Center for download as well.

 

Cheers,

Sam

Please use plain text.