Discussion Groups

Simulation CFD

Reply
Active Contributor
RAALVM
Posts: 31
Registered: ‎08-12-2013
Accepted Solution

Strange cut plane display

205 Views, 3 Replies
11-19-2013 11:00 PM

Hi When I switch to plane results in CFD 360 2014 I get some strange patterns on the plane which are annoyng. Please take a look at the picture attached.

When I switch to global view these patterns desapear, also when I save to the file the patterns disapear

 

My system is an Aspire 7750G with AMD Raedon HD 7670M graphics card

 

 

Thanks

Please use plain text.
*Expert Elite*
OmkarJ
Posts: 440
Registered: ‎10-02-2012

Re: Strange cut plane display

11-20-2013 12:59 AM in reply to: RAALVM

It is a kind of bug I guess. You can remove it by moving the plane slightly and bringing it back to its position. But the best remedy is to disable this:

Results >> Planes >> Planes drop down >> Plane outlines

 

This should make the the strange mosaic disapper.

Please use plain text.
Active Contributor
RAALVM
Posts: 31
Registered: ‎08-12-2013

Re: Strange cut plane display

11-20-2013 03:33 AM in reply to: OmkarJ
Thanks!
Please use plain text.
Valued Contributor
nhahn
Posts: 92
Registered: ‎01-18-2006

Re: Strange cut plane display

11-20-2013 07:53 AM in reply to: OmkarJ

I agree, this is a long-standing and rather frustrating bug.  It is hard to predict when it will happen.  I wonder if it only appears for certain graphics setups, or certain mesh situations, because I think it would be high on the list of things to be addressed if everyone had this issue.

 

I would very much like to see this addressed so that we can leave the plane outlines on but still get decent images consistently.

Please use plain text.