Discussion Groups

Simulation CFD

Reply
Contributor
nmuoio
Posts: 19
Registered: ‎10-17-2011

Sim CFD 360 failed after 424 iterations ... Are those results lost?

226 Views, 2 Replies
01-31-2013 10:44 AM

I ran six jobs overnight, on Simulation CFD 360.  Five of those jobs ran successfully.  One of those jobs is listed as "Failed" in the Simulation Job Manager.

 

Looking at the convergence plot, it appears that 424 iterations were completed, and the simulation may have converged.

 

Is there any way I can access the results?  Or do I have to restart from iteration 0?

Please use plain text.
Product Support
Royce_adsk
Posts: 641
Registered: ‎08-24-2011

Re: Sim CFD 360 failed after 424 iterations ... Are those results lost?

02-11-2013 02:13 PM in reply to: nmuoio

Hi Nathan,

 

I know this is a bit old with no feedback, but I figured I would give some feedback for others that are monitoring.

 

Once the job has failed the results are lost.  Did the log files give you any reason why the job failed?  The job either diverged while solving OR there was a issue in the cloud that caused the anlaysis to fail.  If it was a cloud issue I would just try solving the anlaysis again first.  When the job fails in the cloud your credits should not be deducted if you don't have unlimited access.

 

Royce



Royce Abel
Please use plain text.
Contributor
nmuoio
Posts: 19
Registered: ‎10-17-2011

Re: Sim CFD 360 failed after 424 iterations ... Are those results lost?

02-13-2013 11:17 AM in reply to: Royce_adsk

I suspected as much.  The Simulation Job Manager listed the status as "Failed."  But in the Design Study Bar, the scenario status "running" icon was shown.  My solution was to delete the scenario and build a new one.

Please use plain text.