Community
CFD Forum
Welcome to Autodesk’s CFD Forums. Share your knowledge, ask questions, and explore popular CFD topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Sim CFD 2013 SP1 Available!

21 REPLIES 21
SOLVED
Reply
Message 1 of 22
Royce_adsk
1381 Views, 21 Replies

Sim CFD 2013 SP1 Available!

CFD Users:

 

SP1 is now Available. Please reference this article for more information. Take note that the download in Subscription center does not say SP1, but it is SP1.

 

Uninstall the previous install of 2013 before you install 2013 SP1.

 

Thanks,

Royce



Royce.Abel
Technical Support Manager

21 REPLIES 21
Message 2 of 22
v.ivanov
in reply to: Royce_adsk

Hello!
If i haven't subscription, can i download this SP1?

Message 3 of 22
brian.cranston
in reply to: Royce_adsk

As of this posting, the ADLM still downloads the original release.  The browser download gets you the updated version.

 

-Brian Cranston

Message 4 of 22
Royce_adsk
in reply to: Royce_adsk

Brian,

 

Could you provide more information regaring what is not downloading correctly?  Your comment about ADLM (AutoDesk License Manager) is confusing unless you are refering to something else like the 'Download Now' option.

 

Is there a specific product listing that isn't working like Autodesk Simulation CFD Design Study Environment vs. CFD Motion vs. something else?

 

Thanks,

Royce



Royce.Abel
Technical Support Manager

Message 5 of 22
brian.cranston
in reply to: Royce_adsk

Sorry, I mean the "Autodesk Download Manager" still downloads the initial 2013 release. I did it twice just to make sure I didn't mix something up.  The end result is you get the same 20120223 build, not the 20120824 build when you use the browser download.

Message 6 of 22
hartogj
in reply to: Royce_adsk

Hi Brian

 

Thanks for the post. We have confirmed that the "Download Now" option results in download of the initial release of Simulation CFD 2013 (ie. build 20120223) and are working on correcting it.

 

In the meantime, Simulation CFD 2013 SP1 (build 20120824) can be accessed using the "Browser Download" option as you noted.

 

Thanks again for letting us know.

 

Jon



Jon den Hartog

Product Manager
Message 7 of 22
Royce_adsk
in reply to: hartogj

The pages in subscription center have been updated.

 

Thanks again Brian.



Royce.Abel
Technical Support Manager

Message 8 of 22
DarrenP
in reply to: Royce_adsk

my download seems to only download cfd design study and not cfd motion

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 9 of 22
DarrenP
in reply to: DarrenP

its not grabbing a motion license

its erroring out with a -5 error which is no such feature exists

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 10 of 22
DarrenP
in reply to: DarrenP

its also offering a standalone installation option which i thought simulation cfd was only offered as a network license

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 11 of 22
apolo_vanderberg
in reply to: DarrenP

Darren,

  You only need to download 1.

All of the downloads are to the same installation media. For Simulation CFD, there is only 1 media (32bit and 64bit) for all components. The rest is driven off the license generated by the serial numbers you have.

Message 12 of 22
DarrenP
in reply to: apolo_vanderberg

its showing up as simulation CFD Design study

see screen shot when i switch it to standalone

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 13 of 22
DarrenP
in reply to: DarrenP

i know that I put in 811E1 as the product key

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 14 of 22
apolo_vanderberg
in reply to: DarrenP

The bulk majority of our customers do not have a "Standalone" version. You should be set to Network version where you are pointing to your license server.

 

We do have a Knowledge Base article about switching between Standalone and Network in the even you accidentally went down that path

Message 15 of 22
DarrenP
in reply to: apolo_vanderberg

yes i know

i am just showing you how the program is seeing it as cfd design study and not cfd motion

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 16 of 22
apolo_vanderberg
in reply to: DarrenP

Darren,

 Correct, our Interface is the Design Study Environment.

 

The solver is installed automatically with the installation media. If your license file has a CFD Motion increment than you will have access to the Motion solver. If you just have SImulation CFD (the base solver) you will not have access to Motion.

Message 17 of 22
DarrenP
in reply to: apolo_vanderberg

my license file has CFD motion in it

maybe there is something wrong with the license file that i am not seeing

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 18 of 22
apolo_vanderberg
in reply to: DarrenP

Darren,

Can you elaborate? There will not be a label that says "You have Motion"

After pointing to your license server, iwhen you setup a model you will automatically grab the motion solver when a motion model is setup .

Message 19 of 22
DarrenP
in reply to: DarrenP

i pmed you the contents of the license file

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 20 of 22
DarrenP
in reply to: DarrenP

i am regenerating the license file now

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report