Discussion Groups

Simulation CFD

Reply
Active Member
n.jacky
Posts: 8
Registered: ‎02-17-2012
Accepted Solution

Rotating regions

307 Views, 3 Replies
04-06-2012 05:18 AM

Hello everybody,

 

I would assign some rotating regions. I have already done it a lot of times  but for this case, it's seem to be impossible. I have no warning messages but the rotating region isn't created. I click on the assignment button but nothing happens.

 

Can i have some advices?

 

Thank a lot

Please use plain text.
Employee
ryan.arnaudin
Posts: 65
Registered: ‎08-12-2011

Re: Rotating regions

04-09-2012 12:32 PM in reply to: n.jacky

You will need to apply the neighboring fluids before applying a rotating region. Have you checked this?

Please use plain text.
Contributor
HHOA1307
Posts: 13
Registered: ‎05-29-2014

Re: Rotating regions

05-31-2014 01:09 PM in reply to: ryan.arnaudin
And how can I apply neighboring fluids?
I get this error: "No neighboring fluids found"

Thank you.
Please use plain text.
Employee
ryan.arnaudin
Posts: 65
Registered: ‎08-12-2011

Re: Rotating regions

06-02-2014 09:57 AM in reply to: HHOA1307

The rotating region must be contacting an assigned fluid volume, so apply the fluid materials before setting up your rotating region. One workaround is to select all volumes when you first enter into the materials task and assign air, then go through volume-by-volume and assign the proper materials. 

Please use plain text.