Discussion Groups

Simulation CFD

Reply
Active Member
adesk360
Posts: 6
Registered: ‎10-22-2012
Accepted Solution

Non uniform flow boundary condition

173 Views, 2 Replies
07-29-2013 10:04 AM

Hi,

I am simulating a fairly long-narrow channel. I am planning to do the simulation in sections (to reduce the file size and simulation time and risk of failing). is there anyway I can use the flow/temperature distribution at the exit of one section as the inlet boundary condition of another simulation? how?

 

Thanks alot for your help in advance

 

M. Afshin

Please use plain text.
Product Support
wildej
Posts: 798
Registered: ‎08-25-2011

Re: Non uniform flow boundary condition

07-30-2013 12:53 AM in reply to: adesk360

Hi,

 

The only way really is to use the bulk calculator to measure the average values on a plane at the outlet and then apply this as inlet Boundary Conditions on the next model.

 

Regards,

Jon



Jon Wilde
Please use plain text.
Product Support
Royce_adsk
Posts: 628
Registered: ‎08-24-2011

Re: Non uniform flow boundary condition

08-05-2013 09:58 AM in reply to: wildej

I would give this request kudos since it seems to be the same request.

 

http://forums.autodesk.com/t5/Simulation-CFD-IdeaStation/Mapping-Velocity-Pressure-results/idi-p/434...

 



Royce Abel
Please use plain text.