Discussion Groups

Simulation CFD

Reply
Contributor
max.yang
Posts: 15
Registered: ‎08-09-2011

CFD Solution Monitor entry does not go away

258 Views, 1 Replies
04-24-2012 03:15 PM

Using SimCFD 2013, I ran a CFD scenario and while it was running, I kept an eye on the run using the CFD Solution Monitor. But when the scenario ended, the entry in the Solution Monitor "Design 1/Scenario 1 has finished successfully" did not disappear like it usually would. After I saved and closed both the SimCFD 2013 and Solution Monitor, the moment a new SimCFD 2013/Solution Monitor is launched, that entry comes back. I can run other scenarios without issues, but that entry is slowly becoming an eye sore.

 

Is there a way to remove that entry?

Please use plain text.
Product Support
apolo.vanderberg
Posts: 307
Registered: ‎08-31-2011

Re: CFD Solution Monitor entry does not go away

04-30-2012 10:55 AM in reply to: max.yang

If you want to clean the queue:

 

With CFD closed and no jobs actively running.

Open the ServerManager (Start - Programs - Autodesk - Simulation CFD - SimCFDServer)

Stop and then Start this service.

 

If you are running Vista or Win7 you will have to Right-click and "Run as Admin"

 

Once that service is restarted the queue should get cleared out

Please use plain text.