Discussion Groups

Simulation CFD

Reply
Active Contributor
ajay.s
Posts: 51
Registered: ‎08-13-2013
Accepted Solution

CFD Results to Mechanical SIM

273 Views, 4 Replies
10-15-2013 12:14 AM

Dear CFD Experts,

 

I kindly request you to support me in following issue:

 

I wanna transfer my CFD results of electronic cooling (Pressure+Temp) into Mechanical Simulation inorder to perform Structural analysis (deflection, fatigue due to thermal heat generation)

 

1. How to transfer CFD results ?

2. When I tried using RESULT-RESULTS TASK-FEA MAPPING---it asks for "FEA DECK = .INP" file, but I could not find any .inp file

 

Many Thanks,

 

Kind Regards,

Ajay.S

 

 

Please use plain text.
Product Support
wildej
Posts: 930
Registered: ‎08-25-2011

Re: CFD Results to Mechanical SIM

10-15-2013 01:39 AM in reply to: ajay.s

Hi Ajay,

 

Have you tried this method?

http://vp.telvue.com/preview?id=T01885&video=147697

 

Kind regards,

Jon



Jon Wilde
Please use plain text.
Active Contributor
ajay.s
Posts: 51
Registered: ‎08-13-2013

Re: CFD Results to Mechanical SIM

10-15-2013 04:32 AM in reply to: wildej
Dear Jon,

Many Thanks for the link... Temperature works fine.
-How can I use pressure forces from CFD to SIM Mechanical ?
-How can I use FEA mapping option in CFD ?
Kind Regards,
Ajay.S
Please use plain text.
Product Support
Royce_adsk
Posts: 626
Registered: ‎08-24-2011

Re: CFD Results to Mechanical SIM

10-15-2013 12:31 PM in reply to: ajay.s

Hi Ajay,

 

To map over the CFD pressure results to Mechanical you are going to have to leverage this application.

 

http://apps.exchange.autodesk.com/SCFD/en/Detail/Index?id=appstore.exchange.autodesk.com%3asimcfdtos...

 

Thanks!

Royce



Royce Abel
Please use plain text.
Valued Contributor
nhahn
Posts: 92
Registered: ‎01-18-2006

Re: CFD Results to Mechanical SIM

12-09-2013 11:15 AM in reply to: Royce_adsk

Is there any method to map pressures to Sim Mechanical 2013?  From CFD 2013?  The app says only good for v2014.

Please use plain text.