Discussion Groups

Simulation CFD

Reply
Contributor
brian
Posts: 15
Registered: ‎01-19-2007
Accepted Solution

cfd 2013 crashes on startup

1237 Views, 9 Replies
06-21-2012 09:17 AM

We are running cfd 2013 on 4 computers.  One is having a problem. On startup after the splash screen I get the following message "autodesk simulations cfd 2013 has stopped working".  I have uninstalled and reinstalled the software.  Still get the same error.  Is there a log I need to look at or system processes I need to check.

 

win 7 x64

 

Thanks for the help

Brian Brisbin

National K Works Inc.

Please use plain text.
Contributor
brian
Posts: 15
Registered: ‎01-19-2007

Re: cfd 2013 crashes on startup

06-22-2012 06:17 AM in reply to: brian

We solved it.  It turns out to be a know issue.  "tabletinputservices"

Thanks.

Brian

Please use plain text.
Product Support
Royce_adsk
Posts: 639
Registered: ‎08-24-2011

Re: cfd 2013 crashes on startup

07-19-2012 09:23 AM in reply to: brian

For more information regarding this issue:

 

http://upandready.typepad.com/up_and_ready/2012/06/autodesk-simulation-cfd-2013-crashes-at-startup.h...

 

Also make sure that 'TabletInputService' or 'Tablet PC Input Service' is disabled in your services list in Windows.

 

-Royce



Royce Abel
Please use plain text.
New Member
m.habr
Posts: 2
Registered: ‎07-29-2012

Re: cfd 2013 crashes on startup

07-31-2012 03:05 AM in reply to: Royce_adsk

Hello,

 

I have got a problem with Autodesk SImulation CFD - I have installed it. When I firstly run the program, it requested code and serial, which I have inserted. Then an error appeared - The program stopped working. I have Windows 7 (64bit).

I  dont have on-screen keyboard. Service 'TabletInputService' is stopped.

Do you know what should fix this?

 

Thank you!

Please use plain text.
Contributor
ghmail16
Posts: 13
Registered: ‎03-19-2012

Re: cfd 2013 crashes on startup

08-24-2012 04:16 AM in reply to: m.habr

I have also disabled TableInputServices from Services List but the problem of startup remains?

What is the solution?

Thanks!

 

Please use plain text.
Product Support
Royce_adsk
Posts: 639
Registered: ‎08-24-2011

Re: cfd 2013 crashes on startup

08-31-2012 08:11 AM in reply to: ghmail16
Please use plain text.
Contributor
ghmail16
Posts: 13
Registered: ‎03-19-2012

Re: cfd 2013 crashes on startup

09-01-2012 02:48 AM in reply to: brian

Unfortunately I still have the same problem. I attach a picture to show you what is the message that I get when I try to open it. It is not the same that shows in the page that you cite me.

Thanks Again.

Best Regards!

Please use plain text.
New Member
Zh4x0r
Posts: 2
Registered: ‎10-05-2012

Re: cfd 2013 crashes on startup

10-05-2012 01:30 PM in reply to: ghmail16

What about those of us that need to have the Tablet PC Input Service running?

 

I have a touch-screen computer that I use for design, and enabling/disabling the Tablet service every time I need to run the simulation is going to get very old, very fast.

 

Please use plain text.
Product Support
Royce_adsk
Posts: 639
Registered: ‎08-24-2011

Re: cfd 2013 crashes on startup

10-05-2012 02:58 PM in reply to: Zh4x0r

Please checkout SP1.  That should fix the issue.

 

Thanks!

Royce



Royce Abel
Please use plain text.
Contributor
ghmail16
Posts: 13
Registered: ‎03-19-2012

Re: cfd 2013 crashes on startup

10-06-2012 01:50 AM in reply to: Royce_adsk

My issue was that I was not opening the programm as administrator. When I run it as administrator it opened normally. :-)

 

Please use plain text.