Discussion Groups

Simulation CFD

Reply
Contributor
mingyar
Posts: 11
Registered: ‎11-21-2008
Accepted Solution

Advice on flame simulation

171 Views, 2 Replies
06-10-2013 11:21 AM

Hello, can you give me some advice on how to simulate a flame inside a steel tube?

 

I try to set it as butane but then I have an error message that I have two fluids touching each other (the butane and the air around the tube )

 

Thanks

 

 

Please use plain text.
Product Support
Royce_adsk
Posts: 570
Registered: ‎08-24-2011

Re: Advice on flame simulation

06-10-2013 11:30 AM in reply to: mingyar

Hi Mingyar,

 

With Autodesk Simulation CFD you cannot model combustion effects.  With that said you can create a resistance region that is approximatly the size of your flame and apply a volumetric heat load to that resistance to include the heat released by the flame.

 

-Royce



Royce Abel
Please use plain text.
Contributor
mingyar
Posts: 11
Registered: ‎11-21-2008

Re: Advice on flame simulation

06-10-2013 11:42 AM in reply to: Royce_adsk
Thanks Royce that's exactly what I need, just to simulate the heat released by the flame.
Thanks again
Please use plain text.