Hi, When you are trying to solve you may get an error message, like "Surface 235 cannot be meshed..." with a suggested way to clean that error, which most of the time consists in fixing geometry errors or specific geometric conditions that will prevent correct meshing (on Automeshing). There is currently a known way to find the surface number reported, see: https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/How-to-find-a-surface-by-ID-in-Simulation-CFD.html and https://knowledge.autodesk.com/community/screencast/3aeaae96-fec9-4a96-94f5-34f7a498d8b4 The only issue is when the surface patch is very small and there is a lot of geometry around. I suggest to add first of all a "find surface" function, located in the same menu, that will highlight the surface and place it in the selection list. More so, there should be functions allowing you to zoom to, isolate, so this process can be a very simple task. (along the functionality of Sim Studio) Thank you for considering this. Regards, Adrian
Show More