Discussion Groups
New Idea
2 Kudos

This could prove very useful and save quite a bit of time unisntalling and reinstalling.

1 Kudo

User would like Simulation CFD to have a Undo button to allow the user to rollback undesired operations.

Status: Duplicate

Thanks, Adrian.


As mentioned, there is a duplicate issue that already has received a number of kudos. Please upvote and comment on that issue.

15 Kudos

Can the "Points" window be expanded?

Status: New Idea
by Contributor dkusmer on ‎06-10-2013 01:56 PM

Apparently the "Points" window is a fixed window. It would be nice if it was expandable so the full "Name" description can be seen (see diagram below)?


Thanks, Dan


Points window.png



See...Can the "Points" window be expanded? ...in the Autodesk Simulation CFD discussion group for more information.

2 Kudos

adding flags to change the tolerance

Status: New Idea
by eyaln on ‎07-22-2014 01:59 AM

I am working with BIG models ( BIG Buildings )

Starting the model in Revit and launcing the CFD directly.

I happend many times that I am not able to close the internal volums and afer many many hours I found few gaps of about 1 mm ,

In the construction arena with 100 m long building and wall width of 20 cm I do not care about 1 mm gape.

I am looking for a flag that I will be able to indicate the minimal gap to close the internal volume to be 1 cm.




10 Kudos

Velocity Wind Profile

Status: Solution Provided
by Active Contributor kaiwei on ‎01-09-2013 01:45 AM


May I request that a Velocity Wind Profile be implemented in the next 6 months? This is required for the AEC industry in Singapore. Thank you.

Status: Solution Provided
Thanks for providing feedback. Please check out the new spatially varying boundary conditions in CFD 2015 and let us know what you think.
2 Kudos



There are customers that would be interested in Sim CFD if you could incorporate the code for DOE2 for building energy analysis into Autodesk Simulation CFD.


The code is free and can be found at the link below.


Thank you.




0 Kudos

stop analizing

Status: New Idea
by alain.benchissou on ‎12-08-2014 07:32 AM


When stopping an analysis (especially during a transient one), i would like to be able to get the results quicker than now ; it may take hours to be able to use it, for large (industrial) models


Also why not having free surface with steady state analysis,



0 Kudos

Currently, if I move the CFD interface to a separate screen and press 'Solve' for instance, the window might (usually will) appear back on my other screen. Can we not have a default option where everything is maintained within the interface?