Discussion Groups

Robot Structural Analysis

Valued Contributor
57 Posts
0 Kudos
Registered: ‎05-02-2012
Accepted Solution

Plate Meshing Problems

222 Views, 2 Replies
09-24-2012 05:46 PM



I've problems gettign the mesh working in the attached file and link below. I get multiple nodes generated in region A (can be dealt with by detailed correct), Incoherent mesh generated in region B, and if I solve B the elements are not joining up in region C.




I've tried searching for some input on how to solve these type of meshing problems, the only thread I could find was regarding the advanced meshing settings which didn't help me. If you know how to solve this and can let me know what the approach/solution is that would be very helpful.


Thanks in advance,


Product Support
5,740 Posts
1,305 Kudos
Registered: ‎04-26-2010

Re: Plate Meshing Problems

09-25-2012 01:19 AM in reply to: Jesper.Jensen

Use meshing options as shown in message 4 in this thread:


Rafal Gaweda
Valued Contributor
57 Posts
0 Kudos
Registered: ‎05-02-2012

Re: Plate Meshing Problems

09-26-2012 01:51 AM in reply to: Rafal.Gaweda

Hi Rafal,


Works beautifully. Thanks for you help, much appreciated.