Discussion Groups

Robot Structural Analysis

Reply
Valued Contributor
Jesper.Jensen
Posts: 57
Registered: ‎05-02-2012
Accepted Solution

Plate Meshing Problems

220 Views, 2 Replies
09-24-2012 05:46 PM

Hi,

 

I've problems gettign the mesh working in the attached file and link below. I get multiple nodes generated in region A (can be dealt with by detailed correct), Incoherent mesh generated in region B, and if I solve B the elements are not joining up in region C.

 

http://wtrns.fr/J7GeTc4Q3m_83D_

 

I've tried searching for some input on how to solve these type of meshing problems, the only thread I could find was regarding the advanced meshing settings which didn't help me. If you know how to solve this and can let me know what the approach/solution is that would be very helpful.

 

Thanks in advance,

Jesper

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,289
Registered: ‎04-26-2010

Re: Plate Meshing Problems

09-25-2012 01:19 AM in reply to: Jesper.Jensen

Use meshing options as shown in message 4 in this thread:

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Meshing-into-robots-2012/m-p/3310651/highlig...



Rafal Gaweda
Please use plain text.
Valued Contributor
Jesper.Jensen
Posts: 57
Registered: ‎05-02-2012

Re: Plate Meshing Problems

09-26-2012 01:51 AM in reply to: Rafal.Gaweda

Hi Rafal,

 

Works beautifully. Thanks for you help, much appreciated.

Please use plain text.