Discussion Groups

Robot Structural Analysis

Posts: 4
Registered: ‎08-12-2013
Accepted Solution

Load application problem

100 Views, 1 Replies
10-03-2013 05:57 AM



I'm suddenly experiencing problems when trying to apply loads in the load table. In load cases I have already defined, I want to go to the list column and there type which members to apply the load to. I do this all the time, and suddenly Robot won't let me do this anymore!


I discovered this when I had added a new member, and wanted to add it to an existing acceleration load case. First of all Robot had removed a number of existing members from the load case, apparently at random, and then when I tried to reapply it to the members, I am not allowed to do this.


Maybe I have changed a setting without beeing aware of it?



Ole K

Please use plain text.
Product Support
Posts: 4,849
Registered: ‎12-17-2010

Re: Load application problem

10-03-2013 06:03 AM in reply to: oleklian

Try the following:


Close all opened dialogs, viewers, tables etc. To avoid any possible interaction with the selection done there

Make sure nothing is selected

Save the file under a new name

Open it and try again


If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

Artur Kosakowski
Please use plain text.