Line Load transferring from Revit to Robot

[mostafa.fahim]

Hi 

I tried to model Flat Slab and I applied all wall loads as line load cause I cannot use hosted line load because I don't have any beams.

I transferred the model to robot and I found that the meshing did not consider the location of the line load over the slab, how I can fix this problem.

Thanks.

[Artur.Kosakowski]

There's no such need.

http://docs.autodesk.com/RSA/2013/ENU/filesROBOT/GUID-5E37DD4E-0242-4C74-BA62-0DE0FA3EE67A.htm

I would recommend that in case you are not sure if a load is applied to a model to follow these simple steps:

1. Create a new load case

2. Define a load you want to check

3. Calculate a model

4. Check if the sum of applied forces is equal to the sum of reactions for this load case

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Rafal.Gaweda]

Maybe attachment from message 9 will help you

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/Generation-of-calculation-model-takes-foreve...