Discussion Groups

Robot Structural Analysis

Reply
New Member
Tarrataca
Posts: 1
Registered: ‎01-30-2012
Accepted Solution

Incorrect Data - Error Nr.5000

1275 Views, 17 Replies
01-30-2012 12:42 PM

During the calculation of a structural model (constitute only by bars elements), when in Buckling Deformation (Analysis Type), I switch off the option Omit case for structure with deformations, an error Nr. 5000 happens, and the calculation process is stopped. This error only happens in this situation, since the model is calculated normally when that option is on.

 

Is there any way of overpass this error ?

 

Best regards,

Tarrataca 

Please use plain text.
Product Support
pp2008
Posts: 528
Registered: ‎06-23-2008

Re: Incorrect Data - Error Nr.5000

01-31-2012 12:10 AM in reply to: Tarrataca

Error 5000 generally corresponds to memory problems.

If restarting Robot before running your model does not help please attach your model (compressed to ZIP to reduce its size) to check it in more detail.

 

Regards,



Pawel Pulak
Please use plain text.
Product Support
pp2008
Posts: 528
Registered: ‎06-23-2008

Re: Incorrect Data - Error Nr.5000

02-02-2012 06:18 AM in reply to: pp2008

The model was not attached but if it is the same case are reported via reseller then the reason is in using multi-threaded solver for this type of analysis. Please change to Automatic or Sparse in Tools>Job Preferences> Structure analysis

 

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!

 

Regards,

 



Pawel Pulak
Please use plain text.
Valued Contributor
jo2ny
Posts: 82
Registered: ‎02-07-2012

Re: Incorrect Data - Error Nr.5000

09-24-2012 01:48 AM in reply to: Tarrataca

I got the same error, I read the discussion above, changed the analysys method to Sparse, and back to Automatic.

When set to Automatic, Robot just crashes. When set to Sparse, i get the 5000 error.

What can I do now?

I attached the model.

 

Thanks in advance

 

I'm running Robot x64 on Win 7 x64

Intel Core 2 Quad Q9640 @3.00 GHz

8 Gb Ram

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,581
Registered: ‎04-26-2010

Re: Incorrect Data - Error Nr.5000

09-24-2012 02:02 AM in reply to: jo2ny
Ionut 

I got the same error, 

Change structure type on SHELL ; 3D frame with FEs can not be calculated as FRAME 3D structure.



Rafal Gaweda
Please use plain text.
Valued Contributor
jo2ny
Posts: 82
Registered: ‎02-07-2012

Re: Incorrect Data - Error Nr.5000

09-24-2012 03:19 AM in reply to: Rafal.Gaweda

Yep, worked!

 

Thanks again for your swiftness and precission.

Amazing...

Please use plain text.
Member
kurniawanpp
Posts: 3
Registered: ‎05-02-2012

Re: Incorrect Data - Error Nr.5000

07-24-2013 03:49 AM in reply to: jo2ny

Hi,

 

I recently run an analysis but I've got the same error

 

I've tried to follow your suggestion above (changing the solver) but the result was still the same. What should I do?

  

Thanks a lot!

 

Error 5000.png

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,581
Registered: ‎04-26-2010

Re: Incorrect Data - Error Nr.5000

07-24-2013 03:59 AM in reply to: kurniawanpp

I recently run an analysis but I've got the same error

 

File please.

 



Rafal Gaweda
Please use plain text.
Member
kurniawanpp
Posts: 3
Registered: ‎05-02-2012

Re: Incorrect Data - Error Nr.5000

07-24-2013 04:07 AM in reply to: Rafal.Gaweda

Please download the file via link below because the file is quite big

 

https://share.arup.com/ExPages/filedownload.cfm?FileID=91481249ku67885300ki40800690eg

 

Thanks for the help Rafal

 

Regards,

Kurniawan

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,581
Registered: ‎04-26-2010

Re: Incorrect Data - Error Nr.5000

07-24-2013 06:00 AM in reply to: kurniawanpp

I should have been faster:

 

arup.jpg



Rafal Gaweda
Please use plain text.