How to modify easily "linear on edge" loads ?

[antoine.carimalo]

Hello,

For usual loading types (uniform planar loads as exemple) I can modify easily loads parameters using the following tips :

1- Load table -> Table edition -> left clic on the "list" case corresponding to the load I want to modify

2- go to general view -> select new element to apply load by left clik with CTRL button pull on

But I cannot perform the same tips for the "linear load on edges" type

Regarding this type of load, I don't arrive to select only one edge of a pannel

For the moment I must delete all linear loads on edges an rebuild

Is there another enjoying solution ?

[Rafal.Gaweda]

You can type edge number in the List field additionally then press Tab or Enter to cofirm change

[antoine.carimalo]

Hi

What the command to asset the edge number in the list field ?

Do I need to type :

1

_

e

d

g

e

(

2

)

Or there is shortcut ?

If the list field contains many edges from many pannels, this tips makes sometimes mistakes.

If I modify one edge on a list, sometimes I found other loads on edges modified when I come back to the 3D view.

Do you know why?

[Rafal.Gaweda]

Do I need to type :

1_edge(2)

Exactly, or in case of applying load to several edges of the same panel like that 1_edge(1 2 4)

If the list field contains many edges from many pannels, this tips makes sometimes mistakes.

If I modify one edge on a list, sometimes I found other loads on edges modified when I come back to the 3D view.

Show me example.

[antoine.carimalo]

Ok thanks you,

maybe I maked something wrong because I built a new model an it works.

But it is not very fine modify loads by this way.

Is there a possibility to delete or change value of a linear on edges load by the 3D view as we can do for ather kind of loads?

[Rafal.Gaweda]

 

Is there a possibility to delete or change value of a linear on edges load by the 3D view as we can do for ather kind of loads?

Right hand mouse click on load symbol....

[antoine.carimalo]

Problem is when I modify load value with RMB on load, it changes the value for all edges included in the list field of te table.

Not very usefull and dangerous

Thank you

[Rafal.Gaweda]

Thx for reporting.

I will check.