Hi
I am wondering if someone could illustrate how to calculate necessary thickness of a given material for fire design.
Also, I am curios to know what the following means;
Thanks in advance
Peder
Solved! Go to Solution.
Solved by Artur.Kosakowski. Go to Solution.
I am wondering if someone could illustrate how to calculate necessary thickness of a given material for fire design.
You make the assumption and run verification against defined fire type combinations. If the ratio is above 1 then you increase the thickness of the protection and check again.
Also, I am curios to know what the following means;
7 is the number of the bar from a model.
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.
in the name of GOD .
1) how can I see this form ( your image ) in my Design procedure ?
2) how can I investigate Fire Resistance in my Project ?
3) Is it possible to control for structue whole fire resistance?
thanks beforehand for your answers
See the attached picture. Mind that the option is available for EC3 based steel design codes.
Can't find what you're looking for? Ask the community or share your knowledge.