Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Export Steel Slap robot to Revit structure.

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
A.wikipedia
1069 Views, 5 Replies

Export Steel Slap robot to Revit structure.

Hi all.

I is prolem.

I design slap RC, But why I not export Steel  of robot to revit strucutre ??

 

2012-12-27_1929.png

 

5 REPLIES 5
Message 2 of 6
Message 3 of 6

Thank Artur.

But I don't kwon Artut write : " On the other hand you can export it to ASD Reinforcement and generated dwg drawings there which you can link with the Revit model."

I do not Export  ASD Reinforcement to Revit Modol???

 

Message 4 of 6

It is not possible to directly export  reinforcement of slab generated in Robot to Revit but you may find the following solution helpful:

 

1. Generate slab reinforcement drawing in Robot

2. Open this drawing in ASD reinforcement and save it as dwg

3. Link this dwg file with the project in Revit



Artur Kosakowski
Message 5 of 6

Thank you.

But I do not use steel of revit structure.?????

Please see video.

http://www.screencast.com/t/ZBMO8OtzQZh

Thank again.

Message 6 of 6

As you linked the 2D dwg drawing you will not be able to generate a cross section using Revit tool that is intended for a 3D model. The cross section view should be created in ASD and saved in the same or as a separate dwg file (that you link to Revit).



Artur Kosakowski

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report