Discussion Groups

Robot Structural Analysis

Reply
New Member
caro_webb123
Posts: 2
Registered: ‎01-12-2012
Accepted Solution

Error message 'example not specified'

580 Views, 2 Replies
01-12-2012 02:27 PM

Hi,

 

I'm producing a model which consists of 4 panels of timber joined together. I have modelled the connections between the panels as 'fixed', is this correct? 

I've put the mesh as a simple mesh of 10 by 10. The panels are triangular so will this make a difference?

When i go to calculate, the error message 'example not specified' comes up, do you have any idea why this is?

 

Thanks

Caroline

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,774
Registered: ‎12-17-2010

Re: Error message 'example not specified'

01-12-2012 11:39 PM in reply to: caro_webb123
Caroline,

 


 

I'm producing a model which consists of 4 panels of timber joined together. I have modelled the connections between the panels as 'fixed', is this correct? 

 

If this is the connection type that exists in the real structure then it is :smileyhappy:

 

I've put the mesh as a simple mesh of 10 by 10. The panels are triangular so will this make a difference?

 

If you are happy with the way Robot meshed panels then the parameters are OK but you may find it easier if you define density of meshes by size of elements instead as shown on the attached picture.

 

When i go to calculate, the error message 'example not specified' comes up, do you have any idea why this is?

 

Check what calculation models have been assigned to the panels - should be shell.


If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski
Please use plain text.
New Member
caro_webb123
Posts: 2
Registered: ‎01-12-2012

Re: Error message 'example not specified'

01-13-2012 10:34 AM in reply to: caro_webb123

Thank you, that answers all of my questions :smileyhappy:

Please use plain text.