Discussion Groups

Robot Structural Analysis

Reply
Active Contributor
sedefass
Posts: 29
Registered: ‎04-10-2012
Accepted Solution

Envelop problem

397 Views, 4 Replies
11-01-2012 12:17 PM

Hello, 

 

When I select some of my combinations RSAP should make an envelop diagram, but it does it just for the simple cases, not for the combinations.

Please see the attached pictures.

Thank you in advance

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,207
Registered: ‎04-26-2010

Re: Envelop problem

11-02-2012 01:17 AM in reply to: sedefass

Please send us the file.



Rafal Gaweda
Please use plain text.
Active Contributor
sedefass
Posts: 29
Registered: ‎04-10-2012

Re: Envelop problem

11-02-2012 07:22 AM in reply to: Rafal.Gaweda

Here is the file.

Please use plain text.
Product Support
Rafal.Gaweda
Posts: 5,207
Registered: ‎04-26-2010

Re: Envelop problem

11-05-2012 02:37 AM in reply to: sedefass

It seems the reason can be combination type 2SM for comb 23 24.

IN the attached corrected file the envelopes are generated for all combinatinos except 23 and 24 ;

23 and 24 are also not taken into account for any envelope generation.

If you change them onto CQC or SRSS everything will be fine (another file attached).

 

 

 



Rafal Gaweda
Please use plain text.
Active Contributor
sedefass
Posts: 29
Registered: ‎04-10-2012

Re: Envelop problem

11-05-2012 10:58 AM in reply to: Rafal.Gaweda

Thank you very very much! Now it works just fine! 

Please use plain text.