Distored Element

[Refaat]

Dear Colleagues

My attached model was running perfectly . But suddenly stopped by " distorted element " message .

Could you help me to know what is the reason for this trouble in my model ?

Note : please , attach any capture for explanation

http://www.2shared.com/file/7kJWkxoY/01_online.html

Thanks in advance for your support

Refaat

[Rafal.Gaweda]

Meshig options for cylindrical walls:

File attached.

[Refaat]

Dear Rafal

I opened  your modified file as you set . but

1. I received instability message as appears in capture 00.

2. As you can see in the second capture 01 , the moment  results are illogical .

3. I have noted that Panel sections' definitions and some  member elements materials were not transferred from main model to substructure model since this file was saved as substructure " capture 02 ".

Please , help me to solve this problem.

Note : Please , if you use any capture for explanation . please send it as attached .

Thanks

Refaat

[Rafal.Gaweda]

 

3. I have noted that Panel sections' definitions and some  member elements materials were not transferred from main model to substructure model since this file was saved as substructure " capture 02 ".

And I think this is the reason of instabilities, please assign materials to panels \ define and assign new panel thicknesses.

[Refaat]

 Dear Rafal

We have only this solution for the time being

Thanks

Refaat