Discussion Groups

Robot Structural Analysis

Reply
Valued Contributor
rioja
Posts: 75
Registered: ‎06-02-2012

Deformation info on final drawings

274 Views, 3 Replies
10-08-2012 05:12 PM

Hi all

as a part of my wish list

It is possible to add the following information on the final drawings?

 

1 The max. deflection values and its location for each span on the final drawings

2 The element numbers or only column numbers (in blue) and or the column name like CC_30 or CR30x20

 

Best Regards

Marcelo

 

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,777
Registered: ‎12-17-2010

Re: Deformation info on final drawings

10-08-2012 11:45 PM in reply to: rioja

Could you make a sample of such drawings and send them please? Thank you.



Artur Kosakowski
Please use plain text.
Valued Contributor
rioja
Posts: 75
Registered: ‎06-02-2012

Re: Deformation info on final drawings

10-09-2012 06:37 AM in reply to: Artur.Kosakowski

Hi Artur

Attached you will find a final drawing with a description that can be useful for the constructors

This should be done for every span

The example is composed by only 1 span

 

The numbering of the columns  will help us for easier recognition from the side in which the final drawing was drawn

 

 

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,777
Registered: ‎12-17-2010

Re: Deformation info on final drawings

10-10-2012 02:40 AM in reply to: rioja

Honestly this is the first time I have heard about the need for information about beam deflection being shown on the shop work drawings. My assumption is that at the design stage you have to secure that all SLS requirements are fulfilled which means the defelction of the beam (or each of its span) is kept under control (is within the imposed limits) so there is no further concern about this issue. Is it a particular code / country request?

 

Question to others: any other code or country that requests this too?

 

For names of the column (supports) you can name them the way you like as shown on the attached picture.



Artur Kosakowski
Please use plain text.