Hi,
I have performed a non-linear analysis on a double span continuous structure, using elasto-plastic steel beam properties and tried to use the "criterions to stop analysis" function. I can see that the function works but how can I figure out the condition at which it has stopped e.g.. load factor (the criteria has been achieved at 45% of the applied load)?
Thanks in advance for your kind help.
Best regards,
Solved! Go to Solution.
Solved by skilak. Go to Solution.
You can check this e.g. in the calculation report.
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.
Hi,
I have tried to get the results (rtf file) exactly as you but couldn't. Please could you do it on the attached file and explain whera and how I can create that file of the result calculations (printout composition seems not the way)? Thanks
Please check; http://forums.autodesk.com/t5/Robot-Structural-Analysis/Design-Calculation-Report/m-p/3630398
If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.
Hi,
The calculation note is under "Analysis" not "Results" as instructed in your link; unless my Robot is different
Best regards,
I'm sorry - my mistake - I pointed you to the wrong topic which is about the note for RC design. I will edit it so that it doesn't confuse readers. Thank you for indicating this to me.
Can't find what you're looking for? Ask the community or share your knowledge.