Claddding panels reducing reactions

[PTAadrian]

I have an issue with one of my models whereby when I add cladding panels to the structure, the reactions from a single load type reduce (by about 7%).

Can you please explain the cause and if there is a way to rectify this problem?

The panels also do not distribute its own load in a uniform manner (i.e. they are set to one way distribution but the distribtuion regions are irregular).

Thanks.

[Rafal.Gaweda]

File please.

[PTAadrian]

Please find link attached.

https://www.dropbox.com/s/7jsagandoq0dxrj/8663%20-%20Robot%20Model%20-%20ST%20-%20Cladding%20Panels....

[Rafal.Gaweda]

workaround : all edge loads on edges on\over the claddings edges should be replaced by Linear Load 2p

[PTAadrian]

Thank you for your swift response Rafal.