Discussion Groups

Robot Structural Analysis

Reply
Active Member
zhurukhin
Posts: 7
Registered: ‎03-18-2011
Accepted Solution

Change Analysis type to harmonic - not avaliable

292 Views, 3 Replies
12-28-2011 10:45 AM

Hi!

 

I want to change Analysis type for load number 13 from "Static linear" to "Harmonic", but this button is not avaliable (please, see attached file).

Modal analysis is done, results are avaliable. Besides that, I've already changed analysis type for loads 14 and 15. But for load 13 it doesn't work...

 

Thank you in advance

 

 

Please use plain text.
*Expert Elite* | International Moderator
Romanich
Posts: 576
Registered: ‎09-29-2009

Re: Change Analysis type to harmonic - not avaliable

12-28-2011 10:58 AM in reply to: zhurukhin

Hi,

Try to put Modal case before load case number 13.

   
Please use plain text.
Active Member
zhurukhin
Posts: 7
Registered: ‎03-18-2011

Re: Change Analysis type to harmonic - not avaliable

12-28-2011 12:43 PM in reply to: Romanich

Thanks!

I'll try - if it's a solution, I'll inform you.

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 4,965
Registered: ‎12-17-2010

Re: Change Analysis type to harmonic - not avaliable

12-29-2011 01:30 AM in reply to: Romanich

Thank you for helping others.

 

The corresponding part of Help

http://docs.autodesk.com/RSA/2012/ENU/filesROBOT/GUID-47BF5B84-1D3B-49C8-AA62-F437868E221-704.htm



Artur Kosakowski
Please use plain text.