Discussion Groups

Robot Structural Analysis

Reply
Mentor
faisal.aaouatif
Posts: 213
Registered: ‎10-08-2011

beams Reinforcement module

204 Views, 4 Replies
08-08-2012 03:03 AM

Hi all ,

after calculating a building structure in RSA2013, i export beams to their reinforcement module, and i wanted to modify length of some of them ( few cm  to be in accordance with layout ) without going back to RSA and recalculate the hole structure, but the i found that the beam length textbutton is grayed.

Is there anyway to do it ( it seems to be possible with cbs ...) other than calculating beams reinforcement and exporting them to structural detailing for adjustement ( heavy procedure ...)

Thank you

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 5,111
Registered: ‎12-17-2010

Re: beams Reinforcement module

08-08-2012 03:24 AM in reply to: faisal.aaouatif

It is possible to edit geometry of a beam but you have to select the span you want to modify first. See the attached picture.

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.



Artur Kosakowski
Please use plain text.
Mentor
faisal.aaouatif
Posts: 213
Registered: ‎10-08-2011

Re: beams Reinforcement module

08-08-2012 05:40 AM in reply to: Artur.Kosakowski

Great . Thank you very much

Another question please ; how can recuperate element names ( beams , columns ) defined in RSA ( for ex Barre n°176 named Beam-01...) in reinforcement module automatically ?

 

Please use plain text.
Product Support
Artur.Kosakowski
Posts: 5,111
Registered: ‎12-17-2010

Re: beams Reinforcement module

08-08-2012 06:12 AM in reply to: faisal.aaouatif

No, this is not possible. You have to edit names manually.



Artur Kosakowski
Please use plain text.
Mentor
faisal.aaouatif
Posts: 213
Registered: ‎10-08-2011

Re: beams Reinforcement module

08-08-2012 06:48 AM in reply to: Artur.Kosakowski

Ok Thank you.

May be on a closer update , it would be helpful ...

Please use plain text.