Revit Structure Forum
Welcome to Autodesk’s Revit Structure Forums. Share your knowledge, ask questions, and explore popular Revit Structure topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Toposurface; relative elevation problem

0 REPLIES 0
Reply
Message 1 of 1
BananApan
495 Views, 0 Replies

Toposurface; relative elevation problem

Hi, Im using the toposurface tool in Revit structure 2014, up to date version.

I've set elevation for both survey and project base point to 0.0 

 

When I then draw the toposurface the elevation in the ribbon is set to 0.0: Absolute Elevation, the problem is that the toposurface is placed 105 meters above my project base point.

 

Using the spot elevation tool the relative elevation on the toposurface is 0, the project base and survey points are 105.23 meters.

 

 

Is there anyway I can change the relative elevation to 0.0 as well? So all three of the elevations are set to 0.0.

 

0 REPLIES 0

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report