Revit Structure

Revit Structure

Reply
Distinguished Contributor
bjur
Posts: 158
Registered: ‎09-14-2011
Message 1 of 5 (292 Views)

"Transparent" walls are hiding columns in walls

292 Views, 4 Replies
02-08-2013 12:06 PM

This has been an issue for us for a while.  It seamed that in 2012 the issue was fixed.  Now in 2013 the issue is back.  "Transparent" walls are not...and are hiding structural posts embedded in the wall.  The walls are set to 40% transparent, so that the wood posts that are embedded in the wall will show through.  The issue appears to be that walls created after the posts, get drawn last.  Thus the light hatch coveres up everything below, even though the wall was supposed to be transparent.  The most frusturating thing is that it looks correct on the screen, but prints wrong.  This is a major issue as hiding structual columns in a wall could lead to a column not being installed...with obvious structural rammifications.  The plan view is even set to wire frame, so that in reality, every thing should be transparent.  The Transparent solid hatch looks terrible and is not an option as it's looks more like a cross hatch.  We have tried going back and forth between vector printing vs raster...no good.  Tried hardware excelleration on and off...no difference.  Cutting and pasting the posts back to the same place deletes the column tags associated with the columns...not an option.  Any other ideas out there?  I was under the impression that autodesk used the same code to print that is used to paint the screen which should make those issues non-existant.

Distinguished Contributor
bjur
Posts: 158
Registered: ‎09-14-2011
Message 2 of 5 (285 Views)

Re: "Transparent" walls are hiding columns in walls

02-08-2013 12:52 PM in reply to: bjur

All right, I made an example file showing the bug.

Distinguished Contributor
bjur
Posts: 158
Registered: ‎09-14-2011
Message 3 of 5 (280 Views)

Re: "Transparent" walls are hiding columns in walls

02-08-2013 01:09 PM in reply to: bjur

Here's where it gets wierd, try printing sheet S.4.  The post is visible on the screen, but disapears when printed.

Mentor
KateMorrical
Posts: 248
Registered: ‎11-07-2012
Message 4 of 5 (276 Views)

Re: "Transparent" walls are hiding columns in walls

02-08-2013 01:21 PM in reply to: bjur

Have you applied the latest hotfix?  It specifically addresses "vector print output of transparent elements".

--
Kate Morrical
Digital Design Manager
Washington, DC
BIMmuse.com
Distinguished Contributor
bjur
Posts: 158
Registered: ‎09-14-2011
Message 5 of 5 (271 Views)

Re: "Transparent" walls are hiding columns in walls

02-08-2013 01:58 PM in reply to: KateMorrical

Just applied the hot fix and ...... nothing.  Didn't fix the issue.  Post on page S.4 still won't print, even though it displays on the screen.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.