Revit Structure

Reply
Member
MeelisSinijärv6719
Posts: 4
Registered: ‎04-16-2009
Message 1 of 2 (5,010 Views)
Accepted Solution

Hollow core as a slab part

5010 Views, 1 Replies
12-11-2012 11:13 AM

Here is a link to a youtub video http://www.youtube.com/watch?v=1kslQ9P1160&feature=plcp where the guys are defining hollow core panels as parts of a floor element.

 

Can anyone explain how they can make a part look like a hollow core?

 

Thanks

I figured it out. They used floor based void family to cut the hollows out of the floor and then created the parts according to the panel contours. It's quite a good solution of making hollow core slabs. One advantage is that you do not need to modify panels individually (if angled cuts or shaft cuts) but you can get specific data for each individual panel. And no problem because of automatic joints with beam like hollw cores. 

Member
MeelisSinijärv6719
Posts: 4
Registered: ‎04-16-2009
Message 2 of 2 (4,985 Views)

Re: Hollow core as a slab part

12-12-2012 12:50 PM in reply to: MeelisSinijärv6719

I figured it out. They used floor based void family to cut the hollows out of the floor and then created the parts according to the panel contours. It's quite a good solution of making hollow core slabs. One advantage is that you do not need to modify panels individually (if angled cuts or shaft cuts) but you can get specific data for each individual panel. And no problem because of automatic joints with beam like hollw cores. 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.