Revit Structure

Posts: 5
Registered: ‎09-23-2008
Message 1 of 7 (192 Views)

Good tutorials or good place to start learning...

192 Views, 6 Replies
11-04-2008 01:43 PM
I would like to learn how to properly use Revit Structure, but The tutorials that come with the software only seem to really cover really basic stuff.

Are there any good tutorials anybody can reccomend that actuall gives a little discussion about why things are done the way they are done as oppsoed to just being a set if instructiuons telling me where to point and click? Anybody have any good book reccomendations that would help? Obviously formal training would be great, but it's currently slow around here so I thought I could start some self exploration.

I would like to take a 3 story office buidling that I have done in AutoCAD and do it in Revit as a learing excersise, but I am having a litle trouble just getting started.
Distinguished Contributor
Posts: 118
Registered: ‎08-21-2007
Message 2 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

11-04-2008 02:04 PM in reply to: convolution
I would say jump in and just do it. I know allot of people would disagree with me, but when I started my first project, I didn't have time for formal training. I used the tutorial, this site and my local users group to get up to speed. I think it is like any software such as AutoCAD or Microstation. There are a million ways to achieve the same result, it's just that some are quicker than others. Learn how to operate and move about the program and you will learn short cuts as you go. My first project was a 14 story office building with 6 levels of parking deck. Only 5 of the floors were typical. The project was a success although I could now do the same project much more efficient.
Active Contributor
Posts: 35
Registered: ‎06-03-2003
Message 3 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

11-07-2008 12:03 PM in reply to: convolution
I first went through the tutorial to learn the basics.
Try to attend any free webinars / seminars put on by autodesk or your reseller.
I found the video series put out by very helpful as well. (And no I am in no way affiliated with this site.)

Dive in on a simple sample project.
The first one was tough but the next couple came fairly easy.
Posts: 4
Registered: ‎08-09-2007
Message 4 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

11-13-2008 07:28 AM in reply to: convolution
The tutorials are a great starting point, but they do cover the basics for users that are not familiar with Revit Structure or software in general. Aside from attending a formal training class, you might want to consider purchasing the latest AOTC advanced tutorials from the Autodesk Estore.These tutorials compliment the training class and might give you the more advanced exercises and instructions you need.
Posts: 12
Registered: ‎12-19-2008
Message 5 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

12-26-2008 12:28 AM in reply to: convolution
I started to learn in the tutorial attach to the package try to understand well the behavior of every element and study every parameter of revit.
practice and discover it by your self
Active Member
Posts: 8
Registered: ‎01-27-2009
Message 6 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

01-28-2009 06:44 PM in reply to: convolution
If you haven't checked out the free Revit Structure webcasts from Autodesk, it's worth doing so. Some are better than others, but if nothing else, it helps to see how someone else goes about setting up his projects: is pretty handy, too.
Distinguished Contributor
Posts: 210
Registered: ‎08-30-2006
Message 7 of 7 (192 Views)

Re: Good tutorials or good place to start learning...

02-02-2009 05:43 AM in reply to: convolution

I agree with the previous threads, also I have recently purchased Mastering Revit 2009 from amazon which is really good and it has excercises to work through which are very helpful.

Good Luck

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.