Revit Structure

Reply
Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 1 of 9 (633 Views)

Arched beam for bridge

633 Views, 8 Replies
04-06-2012 01:39 AM

Hi,

 

I'm trying to find out how to draw a arc shaped beam for a bridge in section view in precast concrete.

 

This is what I tried so far:

1. Created a new family: Metric Structural Framing - Beams and Braces.

2. Edit extrusion for the right beam shape.

3. Load into project.

4. Opened section view.

5. Modify beam.

6. Problem: can't draw beam in section workplane.

 

 

Revit Structure 2013 user
Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 2 of 9 (632 Views)

Re: Arched beam for bridge

04-06-2012 01:58 AM in reply to: ro78

I think i figured it out:

 

I have to create it with a "in-place-conponent", pick a grid as a workplane, and create it with the sweep function.

Before that I created a Family Profile where the beam shape (section) is created.

 

Correct me if there is a smarter way to do it (?).

 

 

 

Revit Structure 2013 user
Employee
Joe.Charpentier
Posts: 938
Registered: ‎02-28-2006
Message 3 of 9 (623 Views)

Re: Arched beam for bridge

04-06-2012 07:10 AM in reply to: ro78

A standard Revit beam can be created with an arc shape.  In an elevation or section view, start the beam command.

In the draw gallery in the ribbon (The grid with all of the different options to create beams: lines, rectangle, arcs, splines, picking other geometry) , select an arc sketch method.

 

then you can draw a regular beam, using a standard profile.

 

Is there a reason that this would not be sufficient for what you are trying to do?

 

Joe 



Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 4 of 9 (620 Views)

Re: Arched beam for bridge

04-06-2012 08:46 AM in reply to: Joe.Charpentier

I don't know why it didn't work at my first try.

I changed it according to your reply and that work too and better.

thanks again.

 

 

Revit Structure 2013 user
Employee
Joe.Charpentier
Posts: 938
Registered: ‎02-28-2006
Message 5 of 9 (612 Views)

Re: Arched beam for bridge

04-07-2012 08:56 AM in reply to: ro78

It could be that your workplane was set incorrectly- that's an important part of making sure the beam is created where you expect, especially in an elevation view.

 

Glad I could help.

 

Joe 

Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 6 of 9 (587 Views)

Re: Arched beam for bridge

04-12-2012 07:34 AM in reply to: ro78

 

Do you know an easy way to chamfer the bottem ends of the arched beam? The ends will be horizontal.

 

Next thing is that i can't get to rotate a L-shaped beam so that the cut side will be at the other side. The way i do it now is: draw point B first and then point A.

Revit Structure 2013 user
Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 7 of 9 (579 Views)

Re: Arched beam for bridge

04-12-2012 11:53 PM in reply to: ro78

I cant get the bottem of the beam end to be horizontal (chamfer).

See attach.

Revit Structure 2013 user
Employee
Joe.Charpentier
Posts: 938
Registered: ‎02-28-2006
Message 8 of 9 (553 Views)

Re: Arched beam for bridge

04-23-2012 09:03 AM in reply to: ro78

What "structural material" (or "material for behavior") are you using to model the beam?  I would expect them to clean up automatically.

 

However, since the "opening by face" tool does not work on curved/arc beams (to trim the ends of the beam manually) I would suggest placing a void by face on the beam.  (this would require r2012 or newer.)

 

Joe 

Active Contributor
ro78
Posts: 44
Registered: ‎03-20-2012
Message 9 of 9 (508 Views)

Re: Arched beam for bridge

05-11-2012 03:07 AM in reply to: Joe.Charpentier

At the end I used an triangular extrusion. This worked only when added in the family of the beam.

 

thanks

Revit Structure 2013 user
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.