Revit MEP

Reply
Contributor
CVMN0501
Posts: 24
Registered: ‎10-17-2011
Message 1 of 4 (1,099 Views)
Accepted Solution

Visibility of surface patterns

1099 Views, 3 Replies
08-25-2013 11:45 PM

Hi All,

 

How do i turn off surface patterns of floors quickly? The situation is, the MEP group that i work with receives Architectural revit model from some other consultant, previously they send us models where in floors doesn't have colors in its surface pattern, which is just the way how drawings are presented in MEP, but recently they have incorporated colors in the surface pattern of floors to differentiate the finished floor. How do i turn this off? The only way i see is i need to remove the colors from the surface pattern in the materials editor. Any other way to do this quicker? since the modeling stage is still on-going, our group is going to keep receiving new models, and i'd do the process all over again.

 

Capture4.PNG

The simplest way would be to modify the View Templates (if you're using them) or the View's Visibility/Graphics Overrides. Under the Model Categories tab, locate "Floors". Under the "Projection/Surface"/"Patterns" column, click "Override...". In the following dialog, clear the checkbox for "Visible" and the Floor Patterns should no longer be displayed.

*Expert Elite*
CADastrophe
Posts: 3,343
Registered: ‎08-28-2009
Message 2 of 4 (1,079 Views)

Re: Visibility of surface patterns

08-26-2013 07:41 AM in reply to: CVMN0501

The simplest way would be to modify the View Templates (if you're using them) or the View's Visibility/Graphics Overrides. Under the Model Categories tab, locate "Floors". Under the "Projection/Surface"/"Patterns" column, click "Override...". In the following dialog, clear the checkbox for "Visible" and the Floor Patterns should no longer be displayed.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Contributor
CVMN0501
Posts: 24
Registered: ‎10-17-2011
Message 3 of 4 (1,064 Views)

Re: Visibility of surface patterns

08-26-2013 07:57 PM in reply to: CADastrophe

That worked. Thanks! I'll just have to transfer the view template from file to file when we receive new models.

Valued Contributor
SLDBrown
Posts: 51
Registered: ‎08-19-2005
Message 4 of 4 (953 Views)

Re: Visibility of surface patterns

12-20-2013 11:46 AM in reply to: CADastrophe

OMG! Thanks so much for your reply. I searched forever for that viz control.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.