Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

View Range

1 REPLY 1
Reply
Message 1 of 2
Jarom05
206 Views, 1 Reply

View Range

I have an issue with a parking garage. How do I set up the view range for a garage. From the north end of the floor to the south end changes 10'. The problem is that when I get everything on the south end of parking level 1 visible then everything on the north end of level 1 is not visible. If I change the view range to include everything on the north end of level 1 then it make everything that is on the level below on the south end visible. Any suggestions. I have attached a pic as an illustration.
1 REPLY 1
Message 2 of 2
Scott_Womack
in reply to: Jarom05

It sounds link you'll need to use a Plan Region on approximately 1/2 of the floor plan for each level of the parking garage. This will allow the Plan Region to have a different cut-plane than the portion not in the Plan Region

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report