Revit MEP

Revit MEP

Reply
Valued Contributor
68 Posts
0 Kudos
Registered: ‎03-06-2013
Post 1 of 5
Accepted Solution

urgent : problem with levels and underlay views

318 Views, 4 Replies
11-05-2013 08:49 AM

Hello everyone

i have a small problem on MEP revit

i attached a picture to show the problem

 

steps of the project

1. i created the building (Archi) on Revit Archi with all walls and roof (4 levels)

2. I linked the building on revit link into the project and make the same 4 levels as Archi

3. i started with the duct works and drew the package units

4. i created my own view template

 

now, on the attachments

the first frame :

you can see the 4 levels normally with the duct and units normally

on the second frame :

on level view for example (level 2) you can see the underlay is (level 1) and you can see the drawing normally

on the third frame:

when i go to Level 4 (no matter which underlay i chose) the image would be like this

there i chose underlay 2, and only thing i can see is the duct, no walls and nothing else

 

how can i fix this problem

Variable Integrated Package L.L.C
Abu Dhabi - United Arab Emirates
Oh I see now, your level 4 is way up high and only includes the roof equipment, correct? Try lowering your view depth in your view range settings.
*Expert Elite*
362 Posts
61 Kudos
Registered: ‎10-14-2008
Post 2 of 5

Re: urgent : problem with levels and underlay views

11-05-2013 09:31 AM in reply to: chunky2k
Your Underlay setting should be set to None for all your floors. If that doesn't work, there's something else going on.
Valued Contributor
68 Posts
0 Kudos
Registered: ‎03-06-2013
Post 3 of 5

Re: urgent : problem with levels and underlay views

11-05-2013 09:38 AM in reply to: abulla

Thanks for the answer, but the problem stays the same

nothing appears on level 4, i cant see the lover building

 

Variable Integrated Package L.L.C
Abu Dhabi - United Arab Emirates
*Expert Elite*
362 Posts
61 Kudos
Registered: ‎10-14-2008
Post 4 of 5

Re: urgent : problem with levels and underlay views

11-05-2013 09:42 AM in reply to: chunky2k
Oh I see now, your level 4 is way up high and only includes the roof equipment, correct? Try lowering your view depth in your view range settings.
Valued Contributor
68 Posts
0 Kudos
Registered: ‎03-06-2013
Post 5 of 5

Re: urgent : problem with levels and underlay views

11-05-2013 10:18 AM in reply to: abulla

thanks mate

that was the solution 

Variable Integrated Package L.L.C
Abu Dhabi - United Arab Emirates
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!