Revit MEP

Reply
Contributor
RJServoss
Posts: 14
Registered: ‎07-14-2011
Message 1 of 4 (331 Views)
Accepted Solution

Transfer Grilles

331 Views, 3 Replies
01-27-2014 09:04 AM
How do you all set up transfer grilles? When I use an air terminal family on either end of the transfer, typically air terminals have their flow set to preset, and having both ends of the system set to preset results in an error. If I use a modified end cap family to represent both ends of the transfer, I don't get any errors or warnings, but I also don't get an air terminal family that can be scheduled with the other air terminals. I have created an air terminal family with the flow configuration set to calculated for the sole purpose of handling transfers, but am not all that happy with this set up. How do you all handle transfer grilles?

this link may help

http://forums.augi.com/showthread.php?122490-Transfer-Grilles

let me know what do you think about it

Product Support
Alaaeldin_Alsahli
Posts: 245
Registered: ‎11-19-2013
Message 2 of 4 (279 Views)

Re: Transfer Grilles

01-29-2014 10:44 AM in reply to: RJServoss

this link may help

http://forums.augi.com/showthread.php?122490-Transfer-Grilles

let me know what do you think about it



Alaaeldin Alsahli


Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Contributor
RJServoss
Posts: 14
Registered: ‎07-14-2011
Message 3 of 4 (275 Views)

Re: Transfer Grilles

01-29-2014 10:55 AM in reply to: RJServoss
The solution proposed in that forum is exactly how I already handle the issue. If that's the best option, then that's what I'll continue to do, but I was really hoping to hear some other options to see if there is a better way of doing it.

Rick Servoss, PE, LEED AP BD+C l Associate
LORING Consulting Engineers
1130 Connecticut Ave., NW, Suite 750, Washington, DC 20036-3915
Direct: 202.742.1464 l Main Office: 202.296.6583 l Fax: 202.296.6953
Email: rservoss@loringengineers.com l Visit us: www.loringengineers.com
[cid:image002.jpg@01CF1CF9.BD8ECAC0]
Product Support
Alaaeldin_Alsahli
Posts: 245
Registered: ‎11-19-2013
Message 4 of 4 (257 Views)

Re: Transfer Grilles

01-30-2014 08:39 AM in reply to: RJServoss

then give me time and i will try to figure out something



Alaaeldin Alsahli


Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.