Revit MEP

Reply
Mentor
carriehall42
Posts: 338
Registered: ‎02-01-2005
Message 1 of 4 (209 Views)
Accepted Solution

Title Block parameters

209 Views, 3 Replies
09-04-2012 07:00 AM

We are a small company so the Designed By, Drawn By, Checked By parameters for the title block are the same for every sheet. Is there a way to make these type parameters instead of instance parameters?

 

Thanks in advance

Carrie

I have 2 types of title blocks, Electrical and Mechanical. Text seemed easiest, but I ended up figuring out what I wanted in the first place. I just have a generic label that reads the drawn by and checked by type family paramters. After I woke up and realized what I was doing it was pretty simple.

 

Thanks for your input

*Expert Elite*
CADastrophe
Posts: 3,321
Registered: ‎08-28-2009
Message 2 of 4 (208 Views)

Re: Title Block parameters

09-04-2012 07:05 AM in reply to: carriehall42

No, but I would suggest making it Text in lieu of a Label. Then you don't have to worry about the parameters at all.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Valued Mentor
julianjameson8403
Posts: 458
Registered: ‎06-16-2010
Message 3 of 4 (200 Views)

Re: Title Block parameters

09-04-2012 08:13 AM in reply to: carriehall42

Why not just create a schedule for batch alteration of title sheets and do all three parameters on all the sheets in one go?

If my reply answers your query, please use the Accept as Solution.
Please give Kudos as appropriate to enhance the value of these forums.

Thank you!
Mentor
carriehall42
Posts: 338
Registered: ‎02-01-2005
Message 4 of 4 (197 Views)

Re: Title Block parameters

09-04-2012 08:21 AM in reply to: julianjameson8403

I have 2 types of title blocks, Electrical and Mechanical. Text seemed easiest, but I ended up figuring out what I wanted in the first place. I just have a generic label that reads the drawn by and checked by type family paramters. After I woke up and realized what I was doing it was pretty simple.

 

Thanks for your input

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.