System Types RME 2012

[kadmonkee8]

I am creating a template in Revit MEP 2012, we are using System Types to create all of our Pipe systems for Plumbing and Fire Protection.

my question is, can I add System types to better organize my template families and types etc.

it seems I am limited to the following

Hydronic Supply, Hydronic Return,Sanitary, Vent, Domestic hot & cold Water, and Other

I would like to be able to sort them based on use 

example: Lab, Medical, Air, Filtered Water, Pressure Control, Special Tempreature.

Is this possible without breaking into the API?

thank you

[harinarayana55]

Yes you can. Go to view tab----user interface------system browser-----select any pipe system---------right click-------select properties------duplicate the system.

[kadmonkee8]

Thank you for your response.

I made a mistake in my question. I want to be able to change the System Classification

I have attached an example for clarification.

The System Classification is not editable

I would like to create a system Classification for Non Domestic Cold Water

[abulla · Accepted solution]

Unfortunately you can't add System Classifications at this time. I'd pick the closest system to the one you want to create and duplicate that (Domestic Cold Water in your case), or if there is no comparable system, use Other.

[kadmonkee8]

thank you

thayt is what I will end up doing

hopefully this is something they can improve for later versions