Revit MEP

Reply
Valued Contributor
chunky2k
Posts: 68
Registered: ‎03-06-2013
Message 1 of 4 (195 Views)
Accepted Solution

Slow drawing

195 Views, 3 Replies
09-19-2013 01:22 AM

dear all

i posted this problem in API but no answer, seems there are not alot of visitors there

 

 

i have an drawing on MEP

when i open it it takes time to load, but my main problem when i zoon in, suddenly it freezes  and the loading bar at the bottom starts to move slowly 19% 22% then freezes for a min or 2 then work, and it is very slow from that moment

 

i opened the Archi drawing, no problem, but it seems the MEP problem only

i dont want to Purge as am still working and i dont want to lose the items inside as i might use it

 

i also opend the 3 packups but still same problem

 

it was working great few days ago and i didnt install / update anything

 

can someone help me with that ?

P.S : i have 12 GB Ram so i dont think it is ram problem

but i noticed this happend today (never happend before) when i only open the MEP drawing, the ram

jumps direclty to 1 or 2 GB just when it opens, usually it take 600 MB when opening only without touching the drawing

 

 

 

regards

Variable Integrated Package L.L.C
Abu Dhabi - United Arab Emirates

My initial suggestion is to toggle 'Hardware Acceleration' under Options. Aside from that, perhaps this is an issue regarding your Graphics Card and a possible update.

*Expert Elite*
CADastrophe
Posts: 3,401
Registered: ‎08-28-2009
Message 2 of 4 (175 Views)

Re: Slow drawing

09-19-2013 07:23 AM in reply to: chunky2k

My initial suggestion is to toggle 'Hardware Acceleration' under Options. Aside from that, perhaps this is an issue regarding your Graphics Card and a possible update.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Member
pardeepkumar536
Posts: 5
Registered: ‎10-10-2012
Message 3 of 4 (151 Views)

Re: Slow drawing

09-19-2013 09:09 PM in reply to: chunky2k

You can also try with opening the worksets which are required only.

Also, till you are not performing any calcuation in Revit, uncheck the "Run Calculation for Loads in space' in Electrical Settings and can also use 'Area Only' for Volume calculation in Rooms and Area Compuation.

Valued Contributor
chunky2k
Posts: 68
Registered: ‎03-06-2013
Message 4 of 4 (102 Views)

Re: Slow drawing

09-27-2013 04:43 AM in reply to: CADastrophe

i did the graphic card update and the problem is solved

 

Thanks a lot

Variable Integrated Package L.L.C
Abu Dhabi - United Arab Emirates
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!