Revit MEP

Reply
Valued Contributor
55 Posts
0 Kudos
Registered: ‎05-24-2000
Post 1 of 4
Accepted Solution

sanitary tees

697 Views, 3 Replies
10-09-2012 08:48 AM

If I have a sanitary tee in a run, and I click on the + to make it a double sanitary tee, it never works.I get this error: "The converted fitting was not defined in the routing preference. Please assign one on the connected curve types."

I can insert a doulbe sanitary tee in the main manually, and then reconnect the other branch lines.

Anyone know an answer as to how to make it work in the first place?

genem@... (NNTP handle: genemarz)
You may recognize me from the
hundreds of previous newsreader posts
I've made over the last 10 years
as genemarz

Go to the "Type" Properties of the pipe type you are using.  under the "Fitting" parameters, you can select what type of "Cross" to use.  select your double sanitary tee next to the Cross type.  You might have to delete the tee and re-create the connection for it to recognize the change.

Valued Mentor
751 Posts
51 Kudos
Registered: ‎07-29-2005
Post 2 of 4

Re: sanitary tees

10-09-2012 09:16 AM in reply to: genem

The double-sanitary fitting needs to be defined as a cross in the routing preferences of the pipe type.

Valued Contributor
55 Posts
0 Kudos
Registered: ‎05-24-2000
Post 3 of 4

Re: sanitary tees

10-09-2012 09:20 AM in reply to: dennis

I think it was already?

genem@... (NNTP handle: genemarz)
You may recognize me from the
hundreds of previous newsreader posts
I've made over the last 10 years
as genemarz

Distinguished Mentor
772 Posts
24 Kudos
Registered: ‎08-10-2009
Post 4 of 4

Re: sanitary tees

10-09-2012 10:48 AM in reply to: genem

Go to the "Type" Properties of the pipe type you are using.  under the "Fitting" parameters, you can select what type of "Cross" to use.  select your double sanitary tee next to the Cross type.  You might have to delete the tee and re-create the connection for it to recognize the change.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!