Revit MEP

Reply
New Member
pgauntt
Posts: 1
Registered: ‎08-20-2007
Message 1 of 2 (1,121 Views)
Accepted Solution

Revit MEP - Reducing Tee Generic

1121 Views, 1 Replies
08-20-2012 02:28 PM

Hello,

 

I realize that there have been many posts about the lack of a generic reducing tee for copper pipe. I have made many piping models and as all of you well know, tees are created as standard tees then with reducers to change pipe sizes. After doing some research on other fittings, it appears that I must create my own parameters and look-up tables to create a simple reducing tee. Is this accurate or did I miss something? Any suggestion, solutions of content would be greatly appreciated.

 

Phil G

Here's a link that will help you. Look at the last response in the thread http://forums.autodesk.com/t5/Autodesk-Revit-MEP/Can-anyone-help-creating-a-reducing-tee-pipe-fitting-for-Revit/td-p/2747448

 

I also suggest that you post leaving feedback at the below link. Information gathered is used to improve the application.

 

Product Contact Link: http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

Thanks for posting.

Product Support
alan.quinn
Posts: 631
Registered: ‎09-08-2010
Message 2 of 2 (1,071 Views)

Re: Revit MEP - Reducing Tee Generic

08-22-2012 10:59 AM in reply to: pgauntt

Here's a link that will help you. Look at the last response in the thread http://forums.autodesk.com/t5/Autodesk-Revit-MEP/Can-anyone-help-creating-a-reducing-tee-pipe-fittin...

 

I also suggest that you post leaving feedback at the below link. Information gathered is used to improve the application.

 

Product Contact Link: http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

Thanks for posting.



Alan Quinn
Support Specialist
Product Support
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.