Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Revit MEP - Reducing Tee Generic

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
pgauntt
8455 Views, 3 Replies

Revit MEP - Reducing Tee Generic

Hello,

 

I realize that there have been many posts about the lack of a generic reducing tee for copper pipe. I have made many piping models and as all of you well know, tees are created as standard tees then with reducers to change pipe sizes. After doing some research on other fittings, it appears that I must create my own parameters and look-up tables to create a simple reducing tee. Is this accurate or did I miss something? Any suggestion, solutions of content would be greatly appreciated.

 

Phil G

3 REPLIES 3
Message 2 of 4
alan.quinn
in reply to: pgauntt

Here's a link that will help you. Look at the last response in the thread http://forums.autodesk.com/t5/Autodesk-Revit-MEP/Can-anyone-help-creating-a-reducing-tee-pipe-fittin...

 

I also suggest that you post leaving feedback at the below link. Information gathered is used to improve the application.

 

Product Contact Link: http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

 

Thanks for posting.

Message 3 of 4
gurunathSLXR2
in reply to: pgauntt

Need help in creating reducing TEE in generic model

Message 4 of 4
iainsavage
in reply to: gurunathSLXR2

There is a variety of reducing tees in the UK libraries:

Malleable iron, threaded:

iainsavage_0-1691692092324.png

Carbon steel, welded:

iainsavage_1-1691692181566.png

Copper, soldered:

iainsavage_2-1691692261997.png

...and many more.

 

You should be able to copy them, adjust dimensions in the lookup tables etc.

 

I don't know if there are imperial equivalent families.

 

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report