Revit MEP

Reply
Mentor
carriehall42
Posts: 338
Registered: ‎02-01-2005
Message 1 of 3 (201 Views)
Accepted Solution

Revit MEP 2012 Flat Oval Tee

201 Views, 2 Replies
10-01-2012 12:48 PM

I am in need of a Flat Oval Tee that is adjustable on both sides. (see picture) It doesn't need to have turning vanes as I normally just draw those in. I do not know how to make a fitting, but if someone can walk me through the process I would love to learn. I have a rectangular reducing tee that works great, can I easily modify that into oval?

 

Thanks

Carrie

I have searched and searched and ultimately I modified my rectangular reducing tee to have oval connectors. It just looks rectangular in model unitl I can figure out how to change it.

Product Support
Chris.Aquino
Posts: 402
Registered: ‎06-27-2010
Message 2 of 3 (163 Views)

Re: Revit MEP 2012 Flat Oval Tee

10-04-2012 07:35 AM in reply to: carriehall42

If you have not already, I would check Seek.autodesk.com or other sites such as Revit City, or Augi.

A quick search also found this family:

 

http://www.turbosquid.com/FullPreview/Index.cfm/ID/689540



Chris Aquino
Technical Support Specialist
Customer Service & Support
Autodesk, Inc.


The Revit Clinic
@Revitclinic
Mentor
carriehall42
Posts: 338
Registered: ‎02-01-2005
Message 3 of 3 (159 Views)

Re: Revit MEP 2012 Flat Oval Tee

10-04-2012 07:39 AM in reply to: Chris.Aquino

I have searched and searched and ultimately I modified my rectangular reducing tee to have oval connectors. It just looks rectangular in model unitl I can figure out how to change it.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.