Revit MEP

Reply
Valued Contributor
aturner77
Posts: 84
Registered: ‎03-30-2007
Message 1 of 3 (508 Views)
Accepted Solution

Revit MEP 2012 Duct Fittings not moving with Level

508 Views, 2 Replies
01-26-2012 01:19 PM

Revit MEP 2012 Duct Fittings not moving with Level. The Ducts move but the Duct Fittings will not.

Have you tried searching through the forum for this issue? I know it has come up in the past.

*Expert Elite*
CADastrophe
Posts: 3,325
Registered: ‎08-28-2009
Message 2 of 3 (478 Views)

Re: Revit MEP 2012 Duct Fittings not moving with Level

01-31-2012 05:33 AM in reply to: aturner77

Have you tried searching through the forum for this issue? I know it has come up in the past.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
──────────────────────────────────────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
New Member
sergiolj
Posts: 1
Registered: ‎05-02-2008
Message 3 of 3 (261 Views)

Re: Revit MEP 2012 Duct Fittings not moving with Level

03-15-2013 07:19 AM in reply to: aturner77

That problem makes no sense!

When I change the level pipes are updated but fittings no? The fittings aren't conected with pipes? There is any way to maintain both conected?

 

Someone find the solution?

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.