Revit MEP

Revit MEP

Valued Contributor
Posts: 64
Registered: ‎04-15-2010
Message 1 of 2 (640 Views)

Revit could not find a matching Pipe Segment in Default pipe type

640 Views, 1 Replies
09-20-2013 05:44 AM

Every time I try to start a pipe by clicking the connector on an air handler, I get the message:


"Revit could not find a matching Pipe Segment in Default pipe type. Please check the Default pipe type's routing preferences."


The connectors have a radius set to 1" so the pipe should come out 2".  When I click the connector however it always goes to 2 1/2" so I manually have to change it to 2".  And then once I click to place the segment of pipe, I get the message.  I've checked Segments and Sizes in the Routing Preferences and there is a 2" and 2 1/2" size both listed.  Any idea why I'm getting this error?

- Tim Smith
Motz Engineering

Revit MEP/AutoCAD/Sketchup
UC Architectural Engineering c/o 2016

"There is nothing more expensive than hiring cheap engineers." - Bob Sheeran, Xavier University 01/05/2005
*Expert Elite*
Posts: 3,214
Registered: ‎08-28-2009
Message 2 of 2 (575 Views)

Re: Revit could not find a matching Pipe Segment in Default pipe type

09-23-2013 05:36 AM in reply to: tim102289

Under Mechanical Settings » Pipe Settings » Segments and Sizes, make sure that you're looking at the sizes for the proper Pipe Segment type - make sure the value of the "Segment:" pull-down matches listed under the desired Pipe Type's Routing Preferences. Each type of Segments has it's own Size Catalog.

Corey D.                                                                                                                  ADSK_Logo_EE_2013.png    AutoCAD 2014 User  Revit 2014 User
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate to further enhance these forums. Thank you!
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.